Pressure Calibrators
T-140 - Pressure Manometer
![]() |
• High accuracy gauge and differential capability on 10" H2O, 200 in H20, 1 PSI, 30 PSI, 100 PSI
• Rugged, dust tight, water-resistant case
• Isolated SS sensors on 300 psi and 3,000 psi units; Gauge only
• Easy to read Super-Twist LCD
• Intuitive controls make operation easy, even for infrequent users
• Powered by a common 9 Volt alkaline battery
• Supplied in neoprene sleeve; optional carrying case available.
• Includes NIST Certificate with calibration data
• Rugged, dust tight, water-resistant case
• Isolated SS sensors on 300 psi and 3,000 psi units; Gauge only
• Easy to read Super-Twist LCD
• Intuitive controls make operation easy, even for infrequent users
• Powered by a common 9 Volt alkaline battery
• Supplied in neoprene sleeve; optional carrying case available.
• Includes NIST Certificate with calibration data
DPC-30 - Digital Pressure Calibrator
![]() |
• Works with compressed plant air
• 0.001 psi resolution, 0.035% accuracy
• Dual digital display - psi & mA or voltage
• Gauge, differential, and vacuum modes
• Selectable engineering units
• Pressure switch test
• Rugged case to withstand factory floor environments
• 0.001 psi resolution, 0.035% accuracy
• Dual digital display - psi & mA or voltage
• Gauge, differential, and vacuum modes
• Selectable engineering units
• Pressure switch test
• Rugged case to withstand factory floor environments
BetaPort-P - Pressure Calibrator Modules
![]() |
• 29 standard ranges
• Gauge, vacuum, absolute, compound and differential measurements from inches H2O to 10,000 psi
• Accuracy specified over 15°C to 35°C range
• Isolated and non-isolated measurements, range dependant
• 0.025% full scale accuracy
• Includes NIST Certificate with calibration data
• Gauge, vacuum, absolute, compound and differential measurements from inches H2O to 10,000 psi
• Accuracy specified over 15°C to 35°C range
• Isolated and non-isolated measurements, range dependant
• 0.025% full scale accuracy
• Includes NIST Certificate with calibration data
BetaGauge PIR Digital Pressure Gauge
![]() |
• Temperature Compensated Accuracy over 0 to 50°C
• Accuracy of ±0.04% of Reading ±0.01% Full Scaley
• Standard Available Pressure Ranges - 30 psi compound (c/v), 30 psig, 100 psig, 500 psig, 1000 psig or 3000 psig, 5000 psi and 10,000 psi
• Accuracy of ±0.04% of Reading ±0.01% Full Scaley
• Standard Available Pressure Ranges - 30 psi compound (c/v), 30 psig, 100 psig, 500 psig, 1000 psig or 3000 psig, 5000 psi and 10,000 psi
Martel BetaGauge PI PRO - Образцовый цифровой манометр
![]() |
• Погрешность измерения ±0,05% ВПИ
• Температурная компенсация в диапазоне 0 … 50°С
• 17 стандартных диапазонов
• 18 стандартных единиц измерения +1 пользователя
• Режим хранения данных (Data Logger)
• Индикация окружающей температуры в °C или °F
• Большой, подсвеченный, 5-1/2 разрядный дисплей с цифрами высотой 0.65" и 20-сегментной гистограммой
• Легкий корпус из цинк-алюминиевого сплава
• Тарировка нуля
• Пользовательская установка режима работы и автоматическое отключение для повышения времени работы аккумулятора
• Пользовательская установка режима демпфирования
• Индикация разряда аккумулятора
• Искробезопасное исполнение по CSA, Класс 1, Раздел 2, Группы A, B, C & D; разрешение по ATEX; одобрение СЕ
• Вход для питания от внешнего источника 24 В
• Стандартно эластомерная защита на все автономно монтируемые манометры
• Температурная компенсация в диапазоне 0 … 50°С
• 17 стандартных диапазонов
• 18 стандартных единиц измерения +1 пользователя
• Режим хранения данных (Data Logger)
• Индикация окружающей температуры в °C или °F
• Большой, подсвеченный, 5-1/2 разрядный дисплей с цифрами высотой 0.65" и 20-сегментной гистограммой
• Легкий корпус из цинк-алюминиевого сплава
• Тарировка нуля
• Пользовательская установка режима работы и автоматическое отключение для повышения времени работы аккумулятора
• Пользовательская установка режима демпфирования
• Индикация разряда аккумулятора
• Искробезопасное исполнение по CSA, Класс 1, Раздел 2, Группы A, B, C & D; разрешение по ATEX; одобрение СЕ
• Вход для питания от внешнего источника 24 В
• Стандартно эластомерная защита на все автономно монтируемые манометры
BetaGauge PI Digital Pressure Calibration Test Gauge
![]() |
• Very high accuracy compared to analog test gauges; +/-0.05% F.S.; temperature compensated.
• Temperature compensated accuracy over 0 to 50 degrees C
• Displays in 18 standard or fully custom engineering units
• Temperature compensated accuracy over 0 to 50 degrees C
• Displays in 18 standard or fully custom engineering units
BetaGauge II Modular Pressure Calibrator
![]() |
• Electrical accuracy of ±0.01%
• Pressure module accuracy of ±0.025%
• Pressure module accuracy of ±0.025%
Martel BetaGauge 330 Aero - Аэронавигационный калибратор со встроенным электрическим насосом
![]() |
• Погрешность измерения давления ±0,025% ВПИ
• Измерение температуры с внешним термометром сопротивления Pt100 с погрешностью ±0,1°С в диапазоне +20…+125 °С
• Измерение напряжения с погрешностью ±0,0015% ± 2 е.м.р. в диапазоне до 30 В постоянного тока
• Контроль приборов и систем, подключенных к пневмосистеме объемом до 5 литров
• Плавное задание параметров со скоростью не более 30 м/с
• Одновременная индикация на дисплее 3-х измеряемых величин
• Подсветка дисплея
• Запись до 5 пользовательских установок
• 14 единиц измерения, включая аэронавигационные*
• Категория защиты IP53
• Питание от встроенной аккумуляторной батареи с возможностью подзарядки
• Габаритные размеры 200×100×60 мм
• Масса 1,2 кг
• Измерение температуры с внешним термометром сопротивления Pt100 с погрешностью ±0,1°С в диапазоне +20…+125 °С
• Измерение напряжения с погрешностью ±0,0015% ± 2 е.м.р. в диапазоне до 30 В постоянного тока
• Контроль приборов и систем, подключенных к пневмосистеме объемом до 5 литров
• Плавное задание параметров со скоростью не более 30 м/с
• Одновременная индикация на дисплее 3-х измеряемых величин
• Подсветка дисплея
• Запись до 5 пользовательских установок
• 14 единиц измерения, включая аэронавигационные*
• Категория защиты IP53
• Питание от встроенной аккумуляторной батареи с возможностью подзарядки
• Габаритные размеры 200×100×60 мм
• Масса 1,2 кг
BetaGauge 330 Hand Held Pressure Calibrator
![]() |
• Integrated Electrically Operated Hand Pump Generates Pressure up to 150 PSI and Vacuum up to -12 PSI
• Accuracy to 0.025% FS
• Operates on 8 Standard Alkaline AA Batteries
• Pt100 RTD input for Temperature Measurement with Accuracy of 0.1°C (0.2°F)
• 24 Volt Loop Power to Operate Device under Test
• External Pressure Module Interface Supports all 29 BetaPort-P Pressure Modules
• Switch Test is Automatic Using Internal Sensor or External Pressure Module
• Accuracy to 0.025% FS
• Operates on 8 Standard Alkaline AA Batteries
• Pt100 RTD input for Temperature Measurement with Accuracy of 0.1°C (0.2°F)
• 24 Volt Loop Power to Operate Device under Test
• External Pressure Module Interface Supports all 29 BetaPort-P Pressure Modules
• Switch Test is Automatic Using Internal Sensor or External Pressure Module
BetaGauge 321 - Dual Sensor Temperature Pressure Calibrator
![]() |
• Two isolated, stainless steel, pressure sensors with 0.025% F.S. accuracy
• Temperature-compensation ensures accuracy in field applications
• External pressure module connection supports all BETA Port-P pressure modules (29 ranges) for even more measurement capability
• Measure 4-20 mA input
• Measure up to 30 V DC
• % Error and damping functions
• Temperature-compensation ensures accuracy in field applications
• External pressure module connection supports all BETA Port-P pressure modules (29 ranges) for even more measurement capability
• Measure 4-20 mA input
• Measure up to 30 V DC
• % Error and damping functions
12 Ctrl →











